UV Anti Fading Window Films
UV Window Film is the ideal solution!
This window film is often used in museums, shop fronts and residential homes to provide and increase protection for furnishings and fabrics. UV anti fade film is also a dermaguard, protecting people with skin sensitivity to ultra-violet light.
Get the latest UV anti fade protection and reduce fading, burning and discolouring of expensive goods and window displays with UV films. Barriers in this polyester film filter up to 99.7% of U.V. transmission.
NOTE: UV IS NOT THE ONLY CAUSE OF FADING AS EXCESSIVE HEAT WILL ALSO FADE GOODS - SO IT MAY BE THAT YOU REQUIRE A DUAL HEAT/UV PROTECTION FILM BUT STILL WANT VIEWS IN.
SEE NEUTRAL 50 IN THE HEAT/GLARE SECTION. OR CALL FOR ADVICE.
UV Ultraviolet Protection!
The main contributing factor is the harmful sunlight that accounts for 40% of the fading process the rest is heat/infra red related fading. Anti-fade and UV protection window film will block out up to 99% of these rays, with specific films blocking out up to 99.9% of this destructive wavelength coming though your glass and windows.
We have a clear UV protection anti fade museum grade window film that can help.
You may want to apply a heat reflective window film as part of UV reduction, while keeping clear alround views in and out. All our solar, safety and security window films offer up to 99% UV reduction.
Rejects up to 99% of harmful UV ultraviolet light.
Clear.
Museum Grade.
PDF UV Film Data sheets
: Clear UV
UV Barrier film treatment - Anti Fade Protection.
As a guide this clear glass treatment coating will double the normal fading life, of furnishings, fittings and shop displays from UV damage. This quality UV protection film is specified by architects and designers for use by professional window film installers.
Scientists found that blocking the uv (ultraviolet) radiation portion of the light spectrum would not totally eliminate fade damage but by applying the film would slow down the rate of fading by a factor of three.
- TECH DATA:
- Offer 99% UV protection.
- Spectrum working range: up to 380 nanometers and 99% in 300-400nm.
- Energy reflected: 8%.
- Energy Transmitted: 86%.
- Energy Absorbed: 6%.
- Light Reflection: 8%.
- Glare Reduction: 0%.
- Suitable for Glass Only.
Clear UV Window Film.
Clear UV Window Film alone cannot and will not eliminate fading caused by UV. The use of this product helps and only reduces the effects dramatically.
The effects of UV radiation can be expensive. It can cause colours to fade in both soft furnishings and artefacts. Clear UV reduction films filter out approximately 99% of this UV light making it ideal for shops, museums and other display areas.
Installation: There is no need to remove glass as the film can be applied direct to the glass in the frame.
Buy Anti Fade Protection UV Window Film
How to measure up and buy the correct size Window Film kit
- Measure each Pane of Glass you are wanting to apply window film. Our film sizes are in Metres and centimetres.
- Using the film width as a guide... fit in your glass sizes into the available closest width you think you require and side by side if you can, apply an extra 5-10mm on each dimension as this ensures you are not going to cut too short when applying your film to the glass. The extra mm can be trimmed off after fitting.
- Example: 3 Panes of Glass each measuring 350mm(.35m) x 2000mm(2m).
- You can fit 3 Panes side by side 350 + 350 + 350 = 1065 mm.
- Using the above you can now select a film width of 1220 (as the glass calculation fits well within the 1220 film width if available, if not you have to use the only width available.) and a length of 2 metres. (You will be close on the length so you may want to add another metre. The width of each panel will have an extra 5mm and brings the total width to 1220). NOTE: if the glass dimensions in any orientation do not fit inside any of the available widths you may need to think about 'BUTT JOINTING'
- If you require for example 6 x 350mm x 2000mm panels then just stack them on top of each other and calculate/add or total the length for each set of 3 i.e. 2000mm + 2000mm... together to find a kit length, which will be approximately 4 metres.
- BUTT JOINTS
- BUTT JOINTS - Making sure you use plenty of soapy water solution apply and overlap the film by 25-50mm and using a good straight edge cutt all the way down inside the overlap (Butt Joint). Once done, open up or peel back the cut parts and take away the 'off cuts'. Spray more water and gently push back the cut edges together and hopefully you will have a nice clean joint.
- Add the kit to the shopping cart and either carry on buying or select CheckOut and follow the process through to paying for your goods.
- Other more varying sizes of glass will require more complex thinking and working out to get you the correct kit size. Basically work in terms of squares and oblongs.
- Odd shape glass? Just square it up as a measurement.
- Remember you can always buy more if you find you have not ordered enough.
